WTI Crude--
Brent Crude--
Natural Gas--
ND Rig Count--
WTI Crude--
Brent Crude--
Natural Gas--
ND Rig Count--
North Dakota Rig Count Holds at 36 as One Rig Added, One Removed - Bakken Wire
Rig Report

North Dakota Rig Count Holds at 36 as One Rig Added, One Removed

Phoenix Operating moves within Divide County while Oasis Petroleum shifts a rig to Mountrail County, according to daily rig data.

Bakken Wire Staff·🌅Afternoon Wire·

North Dakota’s active rig count held at 36 on Monday, according to Bakken Wire live rig data, as one rig was added, one rig was removed and one rig moved since the previous day.

The day’s net change was zero, with the addition offsetting the removal. The count remains one rig higher than the 35 active rigs reported one week earlier, on Nov. 9. It is also unchanged from the 36 active rigs reported a month earlier, on Oct. 17, suggesting a stable level of drilling activity over the past month.

Phoenix Operating LLC accounted for both the new rig and the rig removed. The new rig was PATTERSON 280, located at 160-97-29 in Divide County. The removed rig was PATTERSON 276, which had been at 160-98-13, also in Divide County.

The reported move involved OASIS PETROLEUM NORTH AMERICA LLC. Its NOBLE 1 moved to 158-92-33 in Mountrail County. The live data did not list the rig’s prior location or its operational status.

Divide County, a key area for Bakken development, therefore saw a same-day replacement in the daily movement data, while Mountrail County received the moved rig. The day’s activity did not change the statewide count, but it shows rigs continuing to be deployed, withdrawn and repositioned within the North Dakota portion of the Williston Basin.

Rig counts are often volatile because permit availability, rig scheduling, weather, lease obligations and operator budgets can change the number of active rigs from day to day. The North Dakota data for Monday showed that short-term movement can occur even when the statewide total is unchanged.

The steady North Dakota count came as North America added seven rigs week on week, according to Rigzone, which cited Baker Hughes’ latest North America rotary rig count. The continental increase did not produce a net daily gain in North Dakota’s active rig count, which ended Monday at 36.

For royalty owners, the flat count means the number of active rigs operating in North Dakota did not change on the day, though individual locations can move quickly as operators work through permits, spacing units and lease schedules. For operators, the mix of one addition, one removal and one move points to continued rig reallocation rather than a net expansion or contraction.

The Bakken formation remains North Dakota’s primary oil-producing region, and daily rig activity is closely followed as an early indicator of drilling pace. Service companies and operators typically watch weekly and monthly trends more closely than single-day moves, but day-to-day changes can signal which counties and operators are adjusting their programs.

Source

Bakken Wire live rig data; Rigzone

rig activitynorth dakotabakkenphoenix operatingoasis petroleumdivide countymountrail countybaker hughesrigzone

Share this article

Related Articles

North Dakota Rig Count Holds at 34 for Monday - Bakken Wire
Rig Report

North Dakota Rig Count Holds at 34 for Monday

North Dakota's active drilling rig count remained unchanged Monday at 34, according to live data from Bakken Wire. No rigs were added, removed, or moved location since the previous report. The current count represents a slight decline from recent weeks. One week ago, on November 9, 2026, the state reported 35 active rigs. Compared to one month ago, on October 17, 2026, the count is down by two rigs from a total of 36. The stability at 34 rigs continues a period of relatively low drilling activity that has persisted for several years in the Bakken formation. While the day-to-day count is static, the longer-term trend indicates a cautious approach by operators. Rig activity is a leading indicator of future oil production, as new wells must be drilled to offset the steep decline rates typical of shale basins. The current level is a fraction of the historic highs seen during...

☀️Morning Wire·Nov 16
North Dakota Rig Count Holds at 34 Amid Sustained Downtrend - Bakken Wire
Rig Report

North Dakota Rig Count Holds at 34 Amid Sustained Downtrend

The number of active drilling rigs in North Dakota remained unchanged Sunday, holding at 34, according to the latest data from Bakken Wire's live rig tracker. No rigs were added, removed, or moved location since yesterday. The steady daily figure, however, masks a broader trend of gradual decline. Compared to one week ago on November 8, the state has lost three active rigs, dropping from 37. The current count is also down one rig from the 35 rigs active one month ago on October 16. This sustained, albeit modest, contraction reflects ongoing capital discipline by operators and a response to current commodity price environments. A rig count in the mid-30s is consistent with a period of maintenance-level activity focused on core development areas within the Bakken and Three Forks formations. The current level is significantly below the boom-era peaks of over 200 rigs but is within the range that has...

🌅Afternoon Wire·Nov 15
North Dakota Rig Count Steady at 34, Down Three From Last Week - Bakken Wire
Rig Report

North Dakota Rig Count Steady at 34, Down Three From Last Week

The number of active drilling rigs in North Dakota held at 34 on Sunday, November 15, with no daily changes reported, according to live rig data from Bakken Wire. The count showed no new rigs added, none removed, and none that moved location since Saturday. The current fleet size represents a decline from recent activity levels. Compared to one week ago, on November 8, the state has three fewer rigs in operation. The count is also down by one rig from the total of 35 active one month ago, on October 16. The Bakken formation, North Dakota's primary oil-producing region, relies on consistent drilling activity to offset the steep production declines typical of shale wells. The rig count is a closely watched leading indicator of future oil production and industry investment in the Williston Basin. A stable or declining rig count can reflect operator responses to volatile oil prices, capital...

☀️Morning Wire·Nov 15